Britesorb ® D300 40 lb

Britesorb® D300 is a silica xerogel powder specifically produced for beer stabilization. Britesorb® D300 combines good stabilization performance with excellent filtration and minimal dusting. It selectively removes haze-forming proteins from beer without adversely affecting flavor, foam, or filtration rate.

Additional Notes: Britesorb® D300 is best prepared as a 10% slurry in chilled de-aerated water. Contact time should be minimum 5 minutes. Filtration temperature should be maximum 32°F.

Typical Dosage Rate: Beers up to 70% malt ratio are typically treated with 25-40 g/hL (5-10 lbs/100 bbl). Beers greater than 70% malt ratio can require up to 60 g/hL (15 lbs/100 bbl). Analysis of the beer will give best dose rate.

Application rates should be determined by brewery scale trials. RahrBSG can perform colloidal stability analysis and make dosage recommendations.